Phil Nelson Phil Nelson's Profile Page

Phil Nelson Phil Nelson

0 Course Enrolled • 0 Course Completed

Biography

Construction-Manager出題内容、Construction-Manager PDF問題サンプル

CMAAのConstruction-Manager試験に合格するのに、私たちは最も早い時間で合格するのを追求します。私たちはお客様のための利益を求めるのを追求します。私たちはJpexamです。JpexamはCMAAのConstruction-Manager問題集の正確性と高いカバー率を保証します。CMAAのConstruction-Manager問題集を購入したら、Jpexamは一年間で無料更新サービスを提供することができます。は

立派な生活を送るために、彼らはこの試験に関する専門知識の厳密な研究を行いました。 Certified Construction Manager (CCM)のトレーニング資料がありますので、完璧な練習資料の検索に時間をかけないでください。 Construction-Manager試験準備の熟練度を保証できます。ですから、これは決定的な選択です。つまり、Construction-Manager実践教材は、あなたが成功の成果を得るのに役立つことを意味します。

>> Construction-Manager出題内容 <<

実用的Construction-Manager｜ハイパスレートのConstruction-Manager出題内容試験｜試験の準備方法Certified Construction Manager (CCM) PDF問題サンプル

インタネット時代に当たるなので、パソコン上のCMAAのConstruction-Manager試験についての情報は複雑で区別するのは困難なことであると思われます。それで、我々Jpexamの高質で完備なConstruction-Manager問題集を勧めて、あなたの資料を選んでかかる時間のロースを減少し、もっと多くの時間を利用してConstruction-Manager問題集を勉強します。

CMAA Certified Construction Manager (CCM) 認定 Construction-Manager 試験問題 (Q45-Q50):

質問 # 45
Which of the following statements BEST describes the recommended approach CMs should take with respect to building information modeling (BIM)?

A. The CM should require the owner to use BIM.
B. The CM should not discuss BIM unless requested by the owner.
C. The CM should not recommend the use of BIM.
D. The CM should assure the owner has considered using BIM.

正解：D

解説：
In the latest versions of the CMAAStandards of Practice, technology management (including BIM) is recognized as part of the CM's advisory role. The CM should proactivelyassure the owner has consideredBIM as a tool, evaluate its benefits and risks, and integrate it into planning if appropriate. But the CM should not unilaterally impose or require BIM use without the owner's acceptance, nor remain silent on its potential merits (i.e. D is too passive). Also, blanket rejection (B) is inconsistent with modern practice.
Hence the recommended stance is that the CMprompts the owner to consider BIM, educates on its advantages and limitations, and helps the owner decide whether and how to adopt it in that specific project context.

質問 # 46
An inexperienced client on a design-bid-build project states that they do not want the designer to assist in the review of submittals, respond to Requests for Information (RFIs). or conduct any site inspections during the construction phase. How should the CM respond to the client's request?

A. Review the Project Management Plan (PMP) and proceed accordingly.
B. Agree with the client that this will save the project from unnecessary costs and report that the design documents should be error-free.
C. Review the Project Procedures Manual (PPM) and then discuss with the client why their approach may add more risk to the project.
D. Ignore the client and continue coordinating with the design professional to provide these necessary services as part of their contract.

正解：C

解説：
CMAA's Standards of Practice assert the importance of properly defining roles, responsibilities, and risk allocations in the early planning phases (in the Project Procedures Manual and/or Project Management Plan).
The CM's role includes advising the owner of risks associated with the chosen approach. The CM should use the PPM (or the procedures already established) to inform the owner that omitting design professional services during construction (submittals review, RFI responses, inspections) increases the owner's exposure to errors, claims, and omissions.
Choosing option A means referring back to the formal procedures already agreed upon, educating the client about added risks, and working collaboratively to preserve necessary design-phase involvement. Option B would be insubordinate to the client's direction, C is naively optimistic (design documents are rarely perfect), and D is too passive-it doesn't confront the risk issue effectively.
Thus, reviewing the PPM and discussing the risks with the client is the proper CM response.

質問 # 47
During the design review process for a rehabilitation of a corporate office headquarters, the CM should routinely review the designers' submissions, and the reviews will include

A. constructability, biddability, and operability reviews.
B. scope, constructability, and biddability reviews.
C. budget, schedule, and value engineering reviews.
D. constructability, schedule, and maintenance reviews.

正解：A

解説：
According toCMAA's Quality Managementsection, the CM is responsible for performing thoroughdesign phase reviewsto improve quality and minimize design-related issues. These reviews must evaluate the project' sconstructability,biddability, andoperability.
The SOP defines these as follows:
"Design reviews should be conducted for constructability, to ensure the design can be built efficiently; biddability, to ensure the design is clearly and competitively bid; and operability, to ensure the facility can be operated and maintained as intended." This three-part review ensures that the design not only supports quality construction but also long-term functionality.
References:
CMAA Construction Management Standards of Practice, 2010 Edition, Chapter 4 - Quality Management, Section: "Design Phase Reviews," pp. 41-43.
CMAA Study Guide, Quality Management Domain, Objective 4.2.

質問 # 48
The chief estimator for a construction company is asked to provide an estimate based on known project characteristics, such as square footage and unit prices. The estimator will MOST likely be employing which technique?

A. Analogous Estimating
B. Conceptual Estimating
C. Bottom Up Estimating
D. Parametric Estimating

正解：D

解説：
TheCMAA Cost Managementsection definesparametric estimatingas:
"A method of estimating in which the cost of a project or component is determined by applying cost parameters (such as cost per square foot, cost per unit, or cost per linear foot) to known quantities or measurable project characteristics." This approach is typically used during early design stages when only limited design information is available but project parameters (e.g., size, type, location) are known. It provides a reliable and repeatable estimating method for benchmarking or budgeting.
Conceptual estimatingrelies on very preliminary data or similar past projects, whilebottom-up estimating requires detailed quantity takeoffs and is used at later design stages.Analogous estimatinguses direct comparison with a completed project, not specific cost parameters.
Hence, the correct answer isB. Parametric Estimating.
References:
CMAA Construction Management Standards of Practice, 2010 Edition, Chapter 4 - Cost Management, Section: "Estimating Techniques." CMAA CM Study Guide, Cost Management Domain, Objective 4.2: "Apply parametric estimating techniques based on measurable parameters.

質問 # 49
It is ideal for the CM to assist in mitigating potential impacts and unforeseen issues that may develop as early as the

A. post-construction phase.
B. construction phase.
C. design phase.
D. pre-design phase.

正解：D

解説：
According to theCMAA Construction Management Standards of Practice, early involvement of the Construction Manager during thepre-design phaseprovides the greatest opportunity to influence project outcomes and mitigate risks.
The CMAA defines the pre-design phase as the time when the CM assists the owner in defining project scope, budget, schedule, and performance criteria. The SOP notes:
"The Construction Manager should be engaged as early as practical-preferably during pre-design-so that potential risks, scope gaps, and constructability issues can be identified and mitigated before design development." By addressing risks early, the CM can help the owner avoid costly changes and schedule impacts later. Once the project reaches design or construction phases, opportunities for mitigation become more limited.
References (CMAA Documents):
CMAA Construction Management Standards of Practice, Chapter 2 - Project Management, Section: "Pre- Design Phase." CMAA CM Study Guide, Project Management Domain, Objective 2.2: "Identify and mitigate potential project risks early."

質問 # 50
......

多くの受験生がCMAAのConstruction-Manager認定試験に良い成績を取らせるために、Jpexamはより良い結果までずっと努力しています。長年の努力を通じて、JpexamのCMAAのConstruction-Manager認定試験の合格率が１００パーセントになっていました。もしJpexamのCMAAのConstruction-Manager問題集を購入したら、学習教材はどんな問題があれば、或いは試験に不合格になる場合は、全額返金することを保証いたします。

Construction-Manager PDF問題サンプル: https://www.jpexam.com/Construction-Manager_exam.html

Jpexam Construction-Manager PDF問題サンプルはIT認定試験を受験した多くの人々を助けました、CMAA Construction-Manager出題内容高品質と命中率が高い試験勉強資料、CMAA Construction-Manager出題内容 PDFでは読みやすいし、テストエンジンではインタラクティブな方法によってメモリを強化できるので、多くの顧客は両方のバージョンを購入したいと思っています、CMAA Construction-Manager出題内容それは確かにそうですが、その知識を身につけることは難しくないとといわれています、あなたの特定の状況に基づいて、あなたに最も適するConstruction-Manager問題集バージョンを選択できます、我々社のConstruction-Manager PDF問題サンプル - Certified Construction Manager (CCM)練習問題は試験に参加する圧力を減らすだけでなく、お金を無駄にする煩悩を解消できます。

そして有川に抱きつかれた、Construction-Manager証明書は、今日、社会においてますます重要な役割を果たしています、JpexamはIT認定試験を受験した多くの人々を助けました、高品質と命中率が高い試験勉強資料、PDFでは読みやすいし、テストConstruction-Managerエンジンではインタラクティブな方法によってメモリを強化できるので、多くの顧客は両方のバージョンを購入したいと思っています。

素晴らしいCMAA Construction-Manager: Certified Construction Manager (CCM)出題内容 - 有用的なJpexam Construction-Manager PDF問題サンプル

それは確かにそうですが、その知識を身につけることは難しくないとといわれています、あなたの特定の状況に基づいて、あなたに最も適するConstruction-Manager問題集バージョンを選択できます。